Gaf Starter Strip Installation
1 n eligible for up to a lifetime limited warranty when installed on lifetime shingle roofs1 and is an eligible component for gaf residential enhanced warranties. These come with gaf’s “dura grip” adhesive layer which provide the highest stability and security of the starter strip once it’s laid in place.
When separated, each starter shingle is 65⁄ 8 x 393⁄ 8, and each bundle will cover approximately 105 lineal feet.
Gaf starter strip installation. On many gaf shingles when you use gaf starter strip shingles and follow special installation instructions. Prepare…the surface by removing any nails, dirt, or dust. Gaf's asphalt starter strip installation tutorial video, gaf hq, world headquarters, 1 campus drive, parsippany, nj 07054 usa, website:
Quickstart starter roll installation instructions (english/spanish/french) author: Your gaf ridge cap shingles will be covered up to the maximum wind speed above only if your ridge cap shingles are installed in strict accordance with the “maximum wind speed coverage under limited warranty” section of the applicable. A superior alternative to starter shingles.
A new roof is more than just shingles. Quickstart starter roll installation instructions (english/spanish/french) keywords: Starter strips are important for wind resistance.
Gaf.com starter strip shingle application instructions first starter course: Quickstart peel & stick starter roll is designed for fast and easy installation eliminating cutting and nailing of starter strips on the roof. Your gaf ridge cap shingles will be covered up to the maximum wind speed above only if your ridge cap shingles are installed in strict accordance with the maximum wind speed coverage under limited warranty section of the.
Use startermatchtm starter strip shingles. Use startermatchtm starter strip shingles. Apply only a thin uniform layer of asphalt plastic cement less than 1/8 (3mm) thick.
Installation for all other gaf shingles requires use of 6 nails per shingle and gaf starter strip products installed at the eaves and rakes. Best way to install gaf shingles. Use weatherblocker or prostart starter strips.
1 the colors won’t detract from the finished look of the roof and will help provide an excellent finishing touch to your new gaf lifetime designer shingle roof. Additionally, it’s intended for asphalt shingle roofing in fishers, in, having 6” exposure or less. Start by placing your first full sheet of shingles.
Nails on gaf shingles go through the black marker strip. A superior alternative to starter shin. Quickstart® peel and stick starter roll.
Special installation for all other gaf shingles requires use of 6 nails per shingle and gaf starter strip products installed at the eaves and rakes. Install gaf weatherblocker™ starter strip shingles (see figure 1). Install gaf weatherblocker™ starter strip shingles (see figure 1).
This starter can be used with shingles that have an exposure of no more ©2015 gaf 1 campus drive, parsippany, nj 07054. 1 they are specially formulated at the factory for use with select gaf lifetime designer shingles.
Trim 5 (127 mm) and apply as shown (see figure 2). This should completely overlay the starter strip at the lowest corner, including the overhang of the drip edge. This means reduced weight and labor upon installation.
©2015 gaf 1 campus drive, parsippany, nj 07054. One of the most common sources of failure in a roof. Installation of starter strip shingle starter strip shingle is designed to be broken into two pieces, and each piece has its own sealant strip.
Quickstart starter roll installation instructions (english/spanish/french) created date: Gaf.com starter strip shingle application instructions first starter course: In keeping with good roofing practice, apply gaf quickstart® peel & stick starter roll when the substrate is dry and the air temperature is between 45ºf and 120ºf (7ºc and 49ºc).
Trim 5 (127 mm) and apply as shown (see figure 2).
0 Response to "Gaf Starter Strip Installation"
Post a Comment